North Carolina cost guide
Roof replacement cost in North Carolina
In North Carolina, roof replacement prices run below the national average — whether you're in Charlotte, Raleigh, or Greensboro. Here's what a complete, permitted job should cost, and how to tell whether the quote in your hand is fair.
Typical North Carolina range
$8,100 – $23,400
Asphalt shingle roofs commonly run $4.50–$11.00 per sq. ft. installed.
Included at this price: Tear-off, underlayment, flashing, ridge vent, disposal, and permits.
North Carolina prices by project type
| Project | North Carolina range | Unit check |
|---|---|---|
| Asphalt shingle replacement | $8,100 – $21,600 | Architectural shingles commonly run $4.50–$9.00 per sq. ft. installed. |
| Metal roof (standing seam or panel) | $16,200 – $46,800 | Standing seam commonly runs $10–$20 per sq. ft. installed. |
| Tile or slate roof | $22,500 – $72,000 | Concrete tile $10–$20 per sq. ft.; natural slate $18–$35 per sq. ft. |
| Flat or low-slope roof (TPO, EPDM, modified) | $7,200 – $25,200 | Single-ply membrane commonly runs $7–$14 per sq. ft. installed. |
| Roof repair or partial section | $500 – $4,100 | Most localized repairs land between $400 and $2,500. |
Reviewed 2026. Editorial benchmarks from public cost surveys (Zonda Media / Remodeling magazine, Houzz, Angi / HomeAdvisor), adjusted by a state construction-cost index. Not a bid, appraisal, or licensed estimating data.
What a common size costs in North Carolina
Asphalt shingle replacement, installed: $5–$11 per sq. ft. of roof area, adjusted for North Carolina construction costs.
| Size | North Carolina estimate |
|---|---|
| 1,500 sq. ft. | $6,100 – $14,900 |
| 2,000 sq. ft. | $8,100 – $19,800 |
| 2,500 sq. ft. | $10,100 – $24,800 |
| 3,000 sq. ft. | $12,200 – $29,700 |
Per-unit rate from the public cost guides cited above, multiplied by size and the North Carolina construction-cost index. Access, demolition, repairs, and permits can add to it — this is a benchmark, not a bid.
Red flags in North Carolina roof replacement quotes
- Whether tear-off or a layover is specified, and how many existing layers
- Decking replacement priced per sheet up front instead of decided mid-job
- Flashing: step, valley, chimney, and skylight — new vs. "reuse existing"
- Underlayment type and ice-and-water shield coverage
- Intake and exhaust ventilation
Commonly missing line items: drip edge, ridge vent or soffit intake, dumpster, disposal, and magnet sweep, permit and inspection fees, per-sheet decking allowance.
Already have a roof replacement quote in North Carolina?
Upload it for a free red-flag scan — about 20 seconds. Full report with price position, missing scope, and negotiation questions: $12.
Related cost guides
Homeowners in North Carolina can also read and write contractor reviews before choosing who to hire.